Equipment Trade Approvals
This page lists the National Standards Commission trade approval certificates that have been issued to A&D Weighing. A&D Weighing can test and certify all products in their range that are approved for trade use by the National Standards Commission or National Measurement Institute of Australia.
| Model or Series | Certificate |
| GP-12KA; GP-20KA; GP-22KA; GP-30KA; GP-32KA; GP-60KA; GP-100KA; GP-102KA | 6/4C/220 |
| GF Series, GX Series, GX-K Series | 6/4C/219 |
| EW-i Series | 6/4C/230 |
| AD4405; AD4406; AD4407 | S451 |
| AD4402; AD4404 | S503 |
| SK-WP | 6/4C/216 |
| SJ Series | 6/4C/255 |
| LCM-13 Series | S446 |
| LC4102-K030 Load Cell | S484 |
| A&D 150 | 6/9C/250A |
| OHT600 | 6/18/17C |
| ELP 3000, A&D 3000, ELP 1200, ADM Weighbeams | 6/9C/220B |
| AD4322MKII | S250B |
| AD4326A/B; AD4327A/B | S314 |
| AD4323; AD4323DR; AD4324; AD4325 | S251A |
| FG SERIES (Prior to 2005) | 6/4C/81A |
| FZ; FZ-WP SERIES | 6/4C/269 |
| FG-K Series (New Models since 2005) | 6/9C/289 |
| SW (Super Washdown) SERIES | 6/4C/274 |
| SC (Wet Area Scale) SERIES | 6/4C/276 |
| SE (Wet Area Scale) SERIES | 6/4C/276 |
| HV150KA1; HV150KB1; HV150KB1WP; HV60KA1; HV60KB1; HV60KB1WP; HV30KA2; HV30KB2; HV30KB2WP; HW300KA4; HW300KB4 | 6/9C/250A |
| LC5217 (Certificate has lapsed, applicable to replacements only) | S446 |
| SA-15 | 6/4D/284 |
| HV-G SERIES (including HVG-WP) | 6/9C/268 |
| AD4329 | S387 |
| AD4328 | S343A |
| SF/SG Series; CW Series; SW (Simple Weighing Retail) Series | 6/4D/291 |
| AD4401 | S362 |
| AP-30 MKII, AP-30MKIII, AP30-i | 6/4C/210 |
| EK-i | 6/4C/243 |
| LCC11 Load Cell | S410 |
| FS-i Series | 6/4C/250 |
| SB Basework Series | 6/9C/291 |
Trade Certification
A&D Weighing can test and certify all products in their range that are approved for trade use by the National Standards Commission or National Measurement Institute of Australia.
| South Australian Department of Consumer and Business Affairs Certificate of Compliance for Trade | Price (nett) |
| Instruments not exceeding 60 kg capacity | $85.00 |
| Instruments exceeding 60 kg but not exceeding 220 kg capacity | $100.00 |
| Instruments exceeding 220 kg but not exceeding 500 kg capacity | $120.00 |
| Instruments exceeding 500 kg but not exceeding 1000 kg capacity | $150.00 |
| Instruments exceeding 1000 kg but not exceeding 3000 kg capacity | $180.00 |
| Instruments exceeding 3000 kg but not exceeding 5000 kg capacity | $350.00 |
Testing is conducted at an A&D Weighing Service Department. Certification will be enclosed in the carton with goods when despatched.
Not suitable for GF Series Balances, OHT Track & Weighbeam Scales – On site certification recommended.
Pricing is the nett price, no discount is applicable
Prices do not include GST